R E D

/ usr / bin / [ HOME SHELL ]

NAME	SIZE	PERMISSION
[	58.81 KB	-rwxr-xr-x
aa-enabled	30.37 KB	-rwxr-xr-x
aa-exec	30.37 KB	-rwxr-xr-x
ab	58.34 KB	-rwxr-xr-x
addpart	26.23 KB	-rwxr-xr-x
apropos	51.2 KB	-rwxr-xr-x
apt	18.23 KB	-rwxr-xr-x
apt-cache	86.3 KB	-rwxr-xr-x
apt-cdrom	26.3 KB	-rwxr-xr-x
apt-config	26.23 KB	-rwxr-xr-x
apt-extracttemplates	22.31 KB	-rwxr-xr-x
apt-ftparchive	270.31 KB	-rwxr-xr-x
apt-get	46.3 KB	-rwxr-xr-x
apt-key	27.53 KB	-rwxr-xr-x
apt-listchanges	11.96 KB	-rwxr-xr-x
apt-mark	50.3 KB	-rwxr-xr-x
apt-sortpkgs	38.23 KB	-rwxr-xr-x
arch	38.81 KB	-rwxr-xr-x
awk	154.59 KB	-rwxr-xr-x
azureotelcollector	164.31 MB	-rwxr-xr-x
b2sum	58.94 KB	-rwxr-xr-x
base32	42.84 KB	-rwxr-xr-x
base64	42.84 KB	-rwxr-xr-x
basename	38.78 KB	-rwxr-xr-x
basenc	54.84 KB	-rwxr-xr-x
bash	1.18 MB	-rwxr-xr-x
bashbug	6.6 KB	-rwxr-xr-x
bc	94.7 KB	-rwxr-xr-x
bootctl	62.34 KB	-rwxr-xr-x
bunzip2	38.07 KB	-rwxr-xr-x
busctl	82.34 KB	-rwxr-xr-x
bzcat	38.07 KB	-rwxr-xr-x
bzcmp	2.17 KB	-rwxr-xr-x
bzdiff	2.17 KB	-rwxr-xr-x
bzegrep	3.69 KB	-rwxr-xr-x
bzexe	4.76 KB	-rwxr-xr-x
bzfgrep	3.69 KB	-rwxr-xr-x
bzgrep	3.69 KB	-rwxr-xr-x
bzip2	38.07 KB	-rwxr-xr-x
bzip2recover	17.99 KB	-rwxr-xr-x
bzless	1.27 KB	-rwxr-xr-x
bzmore	1.27 KB	-rwxr-xr-x
c_rehash	6.53 KB	-rwxr-xr-x
captoinfo	90.27 KB	-rwxr-xr-x
cat	42.91 KB	-rwxr-xr-x
catchsegv	3.23 KB	-rwxr-xr-x
catman	38.69 KB	-rwxr-xr-x
chage	78.38 KB	-rwxr-sr-x
chardet	965 B	-rwxr-xr-x
chardetect	965 B	-rwxr-xr-x
chattr	14.16 KB	-rwxr-xr-x
chcon	71.06 KB	-rwxr-xr-x
checkgid	14.16 KB	-rwxr-xr-x
chfn	57.05 KB	-rwsr-xr-x
chgrp	70.97 KB	-rwxr-xr-x
chmod	62.94 KB	-rwxr-xr-x
choom	50.23 KB	-rwxr-xr-x
chown	70.97 KB	-rwxr-xr-x
chronyc	111.02 KB	-rwxr-xr-x
chrt	34.23 KB	-rwxr-xr-x
chsh	51.64 KB	-rwsr-xr-x
cksum	38.78 KB	-rwxr-xr-x
clambc	15.75 MB	-rwxr-xr-x
clamconf	142.25 KB	-rwxr-xr-x
clamdscan	162.09 KB	-rwxr-xr-x
clamdtop	158.26 KB	-rwxr-xr-x
clamscan	174.25 KB	-rwxr-xr-x
clamsubmit	154.24 KB	-rwxr-xr-x
clear	14.16 KB	-rwxr-xr-x
clear_console	14.3 KB	-rwxr-xr-x
cloud-id	966 B	-rwxr-xr-x
cloud-init	970 B	-rwxr-xr-x
cloud-init-per	2.06 KB	-rwxr-xr-x
cloud-localds	7.23 KB	-rwxr-xr-x
cmp	46.78 KB	-rwxr-xr-x
col	34.23 KB	-rwxr-xr-x
colcrt	14.23 KB	-rwxr-xr-x
colrm	30.23 KB	-rwxr-xr-x
column	50.23 KB	-rwxr-xr-x
comm	42.84 KB	-rwxr-xr-x
compose	18.05 KB	-rwxr-xr-x
corelist	15.01 KB	-rwxr-xr-x
cp	147.63 KB	-rwxr-xr-x
cpan	8.16 KB	-rwxr-xr-x
cpan5.32-x86_64-linux-gnu	8.18 KB	-rwxr-xr-x
cpio	158.55 KB	-rwxr-xr-x
crontab	42.55 KB	-rwxr-sr-x
csplit	119.06 KB	-rwxr-xr-x
ctstat	22.51 KB	-rwxr-xr-x
curl	250.07 KB	-rwxr-xr-x
cut	46.91 KB	-rwxr-xr-x
cvtsudoers	274.98 KB	-rwxr-xr-x
dash	122.62 KB	-rwxr-xr-x
date	111 KB	-rwxr-xr-x
dbus-cleanup-sockets	14.13 KB	-rwxr-xr-x
dbus-daemon	239.19 KB	-rwxr-xr-x
dbus-monitor	26.14 KB	-rwxr-xr-x
dbus-run-session	14.13 KB	-rwxr-xr-x
dbus-send	30.13 KB	-rwxr-xr-x
dbus-update-activation-environment	14.13 KB	-rwxr-xr-x
dbus-uuidgen	14.13 KB	-rwxr-xr-x
dd	79.07 KB	-rwxr-xr-x
deb-systemd-helper	20.89 KB	-rwxr-xr-x
deb-systemd-invoke	4.31 KB	-rwxr-xr-x
debconf	2.79 KB	-rwxr-xr-x
debconf-apt-progress	11.27 KB	-rwxr-xr-x
debconf-communicate	608 B	-rwxr-xr-x
debconf-copydb	1.68 KB	-rwxr-xr-x
debconf-escape	647 B	-rwxr-xr-x
debconf-set-selections	2.87 KB	-rwxr-xr-x
debconf-show	1.78 KB	-rwxr-xr-x
debianbts	989 B	-rwxr-xr-x
delpart	26.23 KB	-rwxr-xr-x
devdump	171.91 KB	-rwxr-xr-x
df	91.73 KB	-rwxr-xr-x
dh_bash-completion	4.3 KB	-rwxr-xr-x
diff	203.44 KB	-rwxr-xr-x
diff3	63 KB	-rwxr-xr-x
dir	143.73 KB	-rwxr-xr-x
dircolors	46.82 KB	-rwxr-xr-x
dirmngr	565.64 KB	-rwxr-xr-x
dirmngr-client	106.78 KB	-rwxr-xr-x
dirname	38.78 KB	-rwxr-xr-x
dirsplit	16.74 KB	-rwxr-xr-x
dmesg	82.46 KB	-rwxr-xr-x
dnsdomainname	22.07 KB	-rwxr-xr-x
domainname	22.07 KB	-rwxr-xr-x
dpkg	306.53 KB	-rwxr-xr-x
dpkg-deb	158.38 KB	-rwxr-xr-x
dpkg-divert	150.44 KB	-rwxr-xr-x
dpkg-maintscript-helper	20.67 KB	-rwxr-xr-x
dpkg-query	162.43 KB	-rwxr-xr-x
dpkg-realpath	4.05 KB	-rwxr-xr-x
dpkg-split	122.34 KB	-rwxr-xr-x
dpkg-statoverride	62.12 KB	-rwxr-xr-x
dpkg-trigger	78.34 KB	-rwxr-xr-x
du	171.25 KB	-rwxr-xr-x
dvipdf	1007 B	-rwxr-xr-x
ec2metadata	8.19 KB	-rwxr-xr-x
echo	38.78 KB	-rwxr-xr-x
edit	18.05 KB	-rwxr-xr-x
editor	340.64 KB	-rwxr-xr-x
egrep	28 B	-rwxr-xr-x
eject	78.08 KB	-rwxr-xr-x
enc2xs	40.84 KB	-rwxr-xr-x
encguess	2.99 KB	-rwxr-xr-x
env	47.34 KB	-rwxr-xr-x
envsubst	34.23 KB	-rwxr-xr-x
eps2eps	639 B	-rwxr-xr-x
eqn	201.34 KB	-rwxr-xr-x
ex	3.03 MB	-rwxr-xr-x
expand	42.84 KB	-rwxr-xr-x
expiry	30.43 KB	-rwxr-sr-x
expr	114.97 KB	-rwxr-xr-x
factor	79.16 KB	-rwxr-xr-x
faillog	22.45 KB	-rwxr-xr-x
fallocate	34.23 KB	-rwxr-xr-x
false	38.75 KB	-rwxr-xr-x
fcgistarter	14.16 KB	-rwxr-xr-x
fgrep	28 B	-rwxr-xr-x
filan	91.96 KB	-rwxr-xr-x
file	26.42 KB	-rwxr-xr-x
fincore	34.27 KB	-rwxr-xr-x
find	303.72 KB	-rwxr-xr-x
findmnt	67.41 KB	-rwxr-xr-x
flock	34.3 KB	-rwxr-xr-x
fmt	46.81 KB	-rwxr-xr-x
fold	42.81 KB	-rwxr-xr-x
free	26.23 KB	-rwxr-xr-x
freshclam	66.08 KB	-rwxr-xr-x
fuser	39.77 KB	-rwxr-xr-x
genisoimage	622.95 KB	-rwxr-xr-x
geqn	201.34 KB	-rwxr-xr-x
getconf	34.37 KB	-rwxr-xr-x
geteltorito	6.06 KB	-rwxr-xr-x
getent	31.34 KB	-rwxr-xr-x
getopt	22.23 KB	-rwxr-xr-x
gettext	34.23 KB	-rwxr-xr-x
gettext.sh	5.07 KB	-rwxr-xr-x
ghostscript	14.18 KB	-rwxr-xr-x
git	3.22 MB	-rwxr-xr-x
git-receive-pack	3.22 MB	-rwxr-xr-x
git-shell	1.66 MB	-rwxr-xr-x
git-upload-archive	3.22 MB	-rwxr-xr-x
git-upload-pack	3.22 MB	-rwxr-xr-x
gpasswd	86.23 KB	-rwsr-xr-x
gpg	1.05 MB	-rwxr-xr-x
gpg-agent	400.82 KB	-rwxr-xr-x
gpg-connect-agent	146.88 KB	-rwxr-xr-x
gpg-wks-server	190.92 KB	-rwxr-xr-x
gpg-zip	3.43 KB	-rwxr-xr-x
gpgcompose	894.14 KB	-rwxr-xr-x
gpgconf	162.59 KB	-rwxr-xr-x
gpgparsemail	30.23 KB	-rwxr-xr-x
gpgsm	499 KB	-rwxr-xr-x
gpgsplit	70.48 KB	-rwxr-xr-x
gpgtar	143.25 KB	-rwxr-xr-x
gpgv	438.87 KB	-rwxr-xr-x
gpic	220.19 KB	-rwxr-xr-x
grep	198.31 KB	-rwxr-xr-x
groff	121.38 KB	-rwxr-xr-x
grog	2.71 KB	-rwxr-xr-x
grops	181.78 KB	-rwxr-xr-x
grotty	133.41 KB	-rwxr-xr-x
groups	42.81 KB	-rwxr-xr-x
growpart	21.99 KB	-rwxr-xr-x
grub-editenv	374.18 KB	-rwxr-xr-x
grub-file	818.65 KB	-rwxr-xr-x
grub-fstest	940.3 KB	-rwxr-xr-x
grub-glue-efi	244.99 KB	-rwxr-xr-x
grub-kbdcomp	1.64 KB	-rwxr-xr-x
grub-menulst2cfg	229.04 KB	-rwxr-xr-x
grub-mkfont	269.68 KB	-rwxr-xr-x
grub-mkimage	354.18 KB	-rwxr-xr-x
grub-mklayout	249.3 KB	-rwxr-xr-x
grub-mknetdir	406.95 KB	-rwxr-xr-x
grub-mkpasswd-pbkdf2	249.37 KB	-rwxr-xr-x
grub-mkrelpath	240.71 KB	-rwxr-xr-x
grub-mkrescue	993.07 KB	-rwxr-xr-x
grub-mkstandalone	487.34 KB	-rwxr-xr-x
grub-mount	767.26 KB	-rwxr-xr-x
grub-render-label	831.18 KB	-rwxr-xr-x
grub-script-check	268.84 KB	-rwxr-xr-x
grub-syslinux2cfg	779.7 KB	-rwxr-xr-x
gs	14.18 KB	-rwxr-xr-x
gsbj	350 B	-rwxr-xr-x
gsdj	352 B	-rwxr-xr-x
gsdj500	352 B	-rwxr-xr-x
gslj	353 B	-rwxr-xr-x
gslp	350 B	-rwxr-xr-x
gsnd	277 B	-rwxr-xr-x
gtbl	142.35 KB	-rwxr-xr-x
gunzip	2.29 KB	-rwxr-xr-x
gzexe	6.3 KB	-rwxr-xr-x
gzip	95.75 KB	-rwxr-xr-x
h2ph	28.54 KB	-rwxr-xr-x
h2xs	59.5 KB	-rwxr-xr-x
hd	54.24 KB	-rwxr-xr-x
head	46.88 KB	-rwxr-xr-x
helpztags	2.46 KB	-rwxr-xr-x
hexdump	54.24 KB	-rwxr-xr-x
host	102.63 KB	-rwxr-xr-x
hostid	38.75 KB	-rwxr-xr-x
hostname	22.07 KB	-rwxr-xr-x
hostnamectl	26.21 KB	-rwxr-xr-x
htcacheclean	34.16 KB	-rwxr-xr-x
htdbm	26.16 KB	-rwxr-xr-x
htdigest	14.16 KB	-rwxr-xr-x
htop	253.05 KB	-rwxr-xr-x
htpasswd	26.16 KB	-rwxr-xr-x
i386	26.5 KB	-rwxr-xr-x
iconv	59.01 KB	-rwxr-xr-x
id	46.94 KB	-rwxr-xr-x
infocmp	62.23 KB	-rwxr-xr-x
infotocap	90.27 KB	-rwxr-xr-x
install	155.79 KB	-rwxr-xr-x
instmodsh	4.27 KB	-rwxr-xr-x
ionice	30.23 KB	-rwxr-xr-x
ip	617.8 KB	-rwxr-xr-x
ipcmk	30.3 KB	-rwxr-xr-x
ipcrm	34.23 KB	-rwxr-xr-x
ipcs	70.23 KB	-rwxr-xr-x
iptables-xml	96.81 KB	-rwxr-xr-x
ischroot	14.27 KB	-rwxr-xr-x
isodump	179.91 KB	-rwxr-xr-x
isoinfo	339.16 KB	-rwxr-xr-x
isovfy	175.88 KB	-rwxr-xr-x
join	54.91 KB	-rwxr-xr-x
journalctl	74.23 KB	-rwxr-xr-x
json-patch-jsondiff	1004 B	-rwxr-xr-x
json_pp	4.87 KB	-rwxr-xr-x
jsondiff	1004 B	-rwxr-xr-x
jsonpatch	3.58 KB	-rwxr-xr-x
jsonpointer	1.79 KB	-rwxr-xr-x
jsonschema	397 B	-rwxr-xr-x
kbxutil	158.7 KB	-rwxr-xr-x
kernel-install	4.84 KB	-rwxr-xr-x
kill	30.23 KB	-rwxr-xr-x
killall	31.87 KB	-rwxr-xr-x
kmod	166.18 KB	-rwxr-xr-x
last	46.23 KB	-rwxr-xr-x
lastb	46.23 KB	-rwxr-xr-x
lastlog	31.5 KB	-rwxr-xr-x
lcf	7.6 KB	-rwxr-xr-x
ldd	5.28 KB	-rwxr-xr-x
less	179.7 KB	-rwxr-xr-x
lessecho	14.16 KB	-rwxr-xr-x
lessfile	8.34 KB	-rwxr-xr-x
lesskey	23.57 KB	-rwxr-xr-x
lesspipe	8.34 KB	-rwxr-xr-x
lexgrog	98.97 KB	-rwxr-xr-x
lft	2.43 KB	-rwxr-xr-x
lft.db	2.43 KB	-rwxr-xr-x
libnetcfg	15.41 KB	-rwxr-xr-x
link	38.75 KB	-rwxr-xr-x
linux-check-removal	4.56 KB	-rwxr-xr-x
linux-update-symlinks	6.17 KB	-rwxr-xr-x
linux-version	2.63 KB	-rwxr-xr-x
linux32	26.5 KB	-rwxr-xr-x
linux64	26.5 KB	-rwxr-xr-x
ln	71.13 KB	-rwxr-xr-x
lnstat	22.51 KB	-rwxr-xr-x
locale	54.04 KB	-rwxr-xr-x
localectl	26.22 KB	-rwxr-xr-x
localedef	307.75 KB	-rwxr-xr-x
logger	50.82 KB	-rwxr-xr-x
login	55.62 KB	-rwxr-xr-x
loginctl	54.33 KB	-rwxr-xr-x
logname	38.78 KB	-rwxr-xr-x
logresolve	14.16 KB	-rwxr-xr-x
look	14.23 KB	-rwxr-xr-x
ls	143.73 KB	-rwxr-xr-x
lsattr	14.16 KB	-rwxr-xr-x
lsb_release	3.55 KB	-rwxr-xr-x
lsblk	146.23 KB	-rwxr-xr-x
lscpu	98.23 KB	-rwxr-xr-x
lsinitramfs	706 B	-rwxr-xr-x
lsipc	94.23 KB	-rwxr-xr-x
lslocks	38.55 KB	-rwxr-xr-x
lslogins	66.23 KB	-rwxr-xr-x
lsmem	66.23 KB	-rwxr-xr-x
lsmod	166.18 KB	-rwxr-xr-x
lsns	50.23 KB	-rwxr-xr-x
lspci	91.95 KB	-rwxr-xr-x
lspgpot	1.06 KB	-rwxr-xr-x
lzcat	79.29 KB	-rwxr-xr-x
lzcmp	6.86 KB	-rwxr-xr-x
lzdiff	6.86 KB	-rwxr-xr-x
lzegrep	5.87 KB	-rwxr-xr-x
lzfgrep	5.87 KB	-rwxr-xr-x
lzgrep	5.87 KB	-rwxr-xr-x
lzless	1.76 KB	-rwxr-xr-x
lzma	79.29 KB	-rwxr-xr-x
lzmainfo	14.31 KB	-rwxr-xr-x
lzmore	2.11 KB	-rwxr-xr-x
man	112.89 KB	-rwxr-xr-x
man-recode	26.92 KB	-rwxr-xr-x
mandb	135.15 KB	-rwxr-xr-x
manpath	34.7 KB	-rwxr-xr-x
mawk	154.59 KB	-rwxr-xr-x
mcookie	34.3 KB	-rwxr-xr-x
md5sum	46.91 KB	-rwxr-xr-x
md5sum.textutils	46.91 KB	-rwxr-xr-x
mesg	14.23 KB	-rwxr-xr-x
migrate-pubring-from-classic-gpg	2.99 KB	-rwxr-xr-x
mkdir	83.19 KB	-rwxr-xr-x
mkfifo	67.09 KB	-rwxr-xr-x
mkisofs	622.95 KB	-rwxr-xr-x
mknod	75.09 KB	-rwxr-xr-x
mktemp	46.94 KB	-rwxr-xr-x
mkzftree	26.58 KB	-rwxr-xr-x
mokutil	60.19 KB	-rwxr-xr-x
more	58.23 KB	-rwxr-xr-x
mount	54.23 KB	-rwsr-xr-x
mount-image-callback	13.81 KB	-rwxr-xr-x
mountpoint	18.23 KB	-rwxr-xr-x
mt	83.32 KB	-rwxr-xr-x
mt-gnu	83.32 KB	-rwxr-xr-x
mv	143.63 KB	-rwxr-xr-x
namei	34.23 KB	-rwxr-xr-x
nano	340.64 KB	-rwxr-xr-x
nawk	154.59 KB	-rwxr-xr-x
nc	42.48 KB	-rwxr-xr-x
nc.openbsd	42.48 KB	-rwxr-xr-x
neqn	913 B	-rwxr-xr-x
netcat	42.48 KB	-rwxr-xr-x
netstat	151.65 KB	-rwxr-xr-x
networkctl	94.22 KB	-rwxr-xr-x
newgrp	43.59 KB	-rwsr-xr-x
ngettext	34.23 KB	-rwxr-xr-x
nice	42.81 KB	-rwxr-xr-x
nisdomainname	22.07 KB	-rwxr-xr-x
nl	111.03 KB	-rwxr-xr-x
nohup	42.84 KB	-rwxr-xr-x
nproc	42.81 KB	-rwxr-xr-x
nroff	3.22 KB	-rwxr-xr-x
nsenter	34.45 KB	-rwxr-xr-x
nstat	78.23 KB	-rwxr-xr-x
numfmt	66.97 KB	-rwxr-xr-x
od	70.94 KB	-rwxr-xr-x
open	18.05 KB	-rwxr-xr-x
openssl	719.52 KB	-rwxr-xr-x
pager	179.7 KB	-rwxr-xr-x
paperconf	14.29 KB	-rwxr-xr-x
partx	118.23 KB	-rwxr-xr-x
passwd	62.46 KB	-rwsr-xr-x
paste	42.84 KB	-rwxr-xr-x
patch	187.44 KB	-rwxr-xr-x
pathchk	38.78 KB	-rwxr-xr-x
pdb3	61.26 KB	-rwxr-xr-x
pdb3.9	61.26 KB	-rwxr-xr-x
pdf2dsc	698 B	-rwxr-xr-x
pdf2ps	909 B	-rwxr-xr-x
peekfd	14.45 KB	-rwxr-xr-x
perf	528 B	-rwxr-xr-x
perl	3.51 MB	-rwxr-xr-x
perl5.32-x86_64-linux-gnu	14.34 KB	-rwxr-xr-x
perl5.32.1	3.51 MB	-rwxr-xr-x
perlbug	44.2 KB	-rwxr-xr-x
perldoc	125 B	-rwxr-xr-x
perlivp	10.61 KB	-rwxr-xr-x
perlthanks	44.2 KB	-rwxr-xr-x
pf2afm	498 B	-rwxr-xr-x
pfbtopfa	516 B	-rwxr-xr-x
pgrep	30.23 KB	-rwxr-xr-x
phar	14.89 KB	-rwxr-xr-x
phar.phar	14.89 KB	-rwxr-xr-x
phar.phar7.4	14.54 KB	-rwxr-xr-x
phar.phar8.1	14.89 KB	-rwxr-xr-x
phar7.4	14.54 KB	-rwxr-xr-x
phar7.4.phar	14.54 KB	-rwxr-xr-x
phar8.1	14.89 KB	-rwxr-xr-x
phar8.1.phar	14.89 KB	-rwxr-xr-x
php	4.55 MB	-rwxr-xr-x
php7.4	4.55 MB	-rwxr-xr-x
php8.1	5.28 MB	-rwxr-xr-x
pic	220.19 KB	-rwxr-xr-x
pico	340.64 KB	-rwxr-xr-x
piconv	8.16 KB	-rwxr-xr-x
pidof	26.23 KB	-rwxr-xr-x
pidwait	30.23 KB	-rwxr-xr-x
pinentry	62.49 KB	-rwxr-xr-x
pinentry-curses	62.49 KB	-rwxr-xr-x
ping	75.62 KB	-rwxr-xr-x
ping4	75.62 KB	-rwxr-xr-x
ping6	75.62 KB	-rwxr-xr-x
pinky	42.97 KB	-rwxr-xr-x
pkill	30.23 KB	-rwxr-xr-x
pl2pm	4.43 KB	-rwxr-xr-x
pldd	22.57 KB	-rwxr-xr-x
pmap	34.23 KB	-rwxr-xr-x
pod2html	4.04 KB	-rwxr-xr-x
pod2man	14.68 KB	-rwxr-xr-x
pod2text	10.55 KB	-rwxr-xr-x
pod2usage	3.86 KB	-rwxr-xr-x
podchecker	3.57 KB	-rwxr-xr-x
pphs	404 B	-rwxr-xr-x
pr	75.09 KB	-rwxr-xr-x
preconv	62.35 KB	-rwxr-xr-x
print	18.05 KB	-rwxr-xr-x
printafm	395 B	-rwxr-xr-x
printenv	38.75 KB	-rwxr-xr-x
printf	58.84 KB	-rwxr-xr-x
prlimit	38.74 KB	-rwxr-xr-x
procan	79.86 KB	-rwxr-xr-x
prove	13.33 KB	-rwxr-xr-x
prtstat	18.51 KB	-rwxr-xr-x
ps	134.45 KB	-rwxr-xr-x
ps2ascii	631 B	-rwxr-xr-x
ps2epsi	1.23 KB	-rwxr-xr-x
ps2pdf	272 B	-rwxr-xr-x
ps2pdf12	215 B	-rwxr-xr-x
ps2pdf13	215 B	-rwxr-xr-x
ps2pdf14	215 B	-rwxr-xr-x
ps2pdfwr	1.05 KB	-rwxr-xr-x
ps2ps	647 B	-rwxr-xr-x
ps2ps2	669 B	-rwxr-xr-x
ps2txt	631 B	-rwxr-xr-x
pslog	14.38 KB	-rwxr-xr-x
pstree	35.73 KB	-rwxr-xr-x
pstree.x11	35.73 KB	-rwxr-xr-x
ptar	3.47 KB	-rwxr-xr-x
ptardiff	2.57 KB	-rwxr-xr-x
ptargrep	4.29 KB	-rwxr-xr-x
ptx	135.09 KB	-rwxr-xr-x
pwd	42.84 KB	-rwxr-xr-x
pwdx	14.22 KB	-rwxr-xr-x
py3clean	7.62 KB	-rwxr-xr-x
py3compile	12.88 KB	-rwxr-xr-x
py3versions	11.44 KB	-rwxr-xr-x
pydoc3	78 B	-rwxr-xr-x
pydoc3.9	78 B	-rwxr-xr-x
pygettext3	21.03 KB	-rwxr-xr-x
pygettext3.9	21.03 KB	-rwxr-xr-x
pyjwt3	948 B	-rwxr-xr-x
python3	5.2 MB	-rwxr-xr-x
python3.9	5.2 MB	-rwxr-xr-x
qemu-img	1.93 MB	-rwxr-xr-x
qemu-io	1.87 MB	-rwxr-xr-x
qemu-nbd	2.02 MB	-rwxr-xr-x
querybts	10.82 KB	-rwxr-xr-x
rbash	1.18 MB	-rwxr-xr-x
rcp	114.14 KB	-rwxr-xr-x
rdma	130.23 KB	-rwxr-xr-x
readlink	50.81 KB	-rwxr-xr-x
realpath	54.84 KB	-rwxr-xr-x
redis-benchmark	722.51 KB	-rwxr-xr-x
redis-check-aof	1.23 MB	-rwxr-xr-x
redis-check-rdb	1.23 MB	-rwxr-xr-x
redis-cli	333.95 KB	-rwxr-xr-x
redis-server	1.23 MB	-rwxr-xr-x
renice	14.22 KB	-rwxr-xr-x
reportbug	110 KB	-rwxr-xr-x
reset	30.16 KB	-rwxr-xr-x
resize-part-image	4.24 KB	-rwxr-xr-x
resizepart	62.23 KB	-rwxr-xr-x
resolvectl	126.37 KB	-rwxr-xr-x
rev	14.23 KB	-rwxr-xr-x
rgrep	30 B	-rwxr-xr-x
rlogin	782.79 KB	-rwxr-xr-x
rm	71 KB	-rwxr-xr-x
rmdir	50.81 KB	-rwxr-xr-x
rnano	340.64 KB	-rwxr-xr-x
rotatelogs	26.23 KB	-rwxr-xr-x
routef	208 B	-rwxr-xr-x
routel	1.62 KB	-rwxr-xr-x
rsh	782.79 KB	-rwxr-xr-x
rtstat	22.51 KB	-rwxr-xr-x
run-mailcap	18.05 KB	-rwxr-xr-x
run-parts	26.83 KB	-rwxr-xr-x
runcon	42.91 KB	-rwxr-xr-x
rview	3.03 MB	-rwxr-xr-x
rvim	3.03 MB	-rwxr-xr-x
savelog	10.24 KB	-rwxr-xr-x
scp	114.14 KB	-rwxr-xr-x
screen	471.01 KB	-rwxr-xr-x
script	66.23 KB	-rwxr-xr-x
scriptlive	54.23 KB	-rwxr-xr-x
scriptreplay	42.23 KB	-rwxr-xr-x
sdiff	46.91 KB	-rwxr-xr-x
sed	119.36 KB	-rwxr-xr-x
see	18.05 KB	-rwxr-xr-x
select-editor	2.39 KB	-rwxr-xr-x
sensible-browser	1.2 KB	-rwxr-xr-x
sensible-editor	1.15 KB	-rwxr-xr-x
sensible-pager	452 B	-rwxr-xr-x
seq	54.88 KB	-rwxr-xr-x
setarch	26.5 KB	-rwxr-xr-x
setpci	30.23 KB	-rwxr-xr-x
setpriv	50.23 KB	-rwxr-xr-x
setsid	14.23 KB	-rwxr-xr-x
setterm	46.23 KB	-rwxr-xr-x
sftp	170.35 KB	-rwxr-xr-x
sg	43.59 KB	-rwsr-xr-x
sh	122.62 KB	-rwxr-xr-x
sha1sum	50.91 KB	-rwxr-xr-x
sha224sum	62.91 KB	-rwxr-xr-x
sha256sum	62.91 KB	-rwxr-xr-x
sha384sum	66.91 KB	-rwxr-xr-x
sha512sum	66.91 KB	-rwxr-xr-x
shasum	9.74 KB	-rwxr-xr-x
shred	63.09 KB	-rwxr-xr-x
shuf	58.97 KB	-rwxr-xr-x
sigtool	15.81 MB	-rwxr-xr-x
skill	30.23 KB	-rwxr-xr-x
slabtop	22.23 KB	-rwxr-xr-x
sleep	42.78 KB	-rwxr-xr-x
slogin	782.79 KB	-rwxr-xr-x
snice	30.23 KB	-rwxr-xr-x
socat	397.93 KB	-rwxr-xr-x
soelim	46.35 KB	-rwxr-xr-x
sort	115.63 KB	-rwxr-xr-x
splain	18.96 KB	-rwxr-xr-x
split	59.47 KB	-rwxr-xr-x
ss	177.06 KB	-rwxr-xr-x
ssh	782.79 KB	-rwxr-xr-x
ssh-add	366.13 KB	-rwxr-xr-x
ssh-agent	346.13 KB	-rwxr-sr-x
ssh-argv0	1.42 KB	-rwxr-xr-x
ssh-copy-id	10.69 KB	-rwxr-xr-x
ssh-keygen	474.2 KB	-rwxr-xr-x
ssh-keyscan	458.23 KB	-rwxr-xr-x
stat	83.19 KB	-rwxr-xr-x
stdbuf	50.84 KB	-rwxr-xr-x
streamzip	5.39 KB	-rwxr-xr-x
stty	82.94 KB	-rwxr-xr-x
su	70.23 KB	-rwsr-xr-x
sudo	178.32 KB	-rwsr-xr-x
sudoedit	178.32 KB	-rwsr-xr-x
sudoreplay	115.39 KB	-rwxr-xr-x
sum	46.88 KB	-rwxr-xr-x
sync	38.81 KB	-rwxr-xr-x
systemctl	1.02 MB	-rwxr-xr-x
systemd	1.66 MB	-rwxr-xr-x
systemd-analyze	1.62 MB	-rwxr-xr-x
systemd-ask-password	14.33 KB	-rwxr-xr-x
systemd-cat	14.22 KB	-rwxr-xr-x
systemd-cgls	18.32 KB	-rwxr-xr-x
systemd-cgtop	34.23 KB	-rwxr-xr-x
systemd-delta	26.22 KB	-rwxr-xr-x
systemd-detect-virt	14.21 KB	-rwxr-xr-x
systemd-escape	18.21 KB	-rwxr-xr-x
systemd-hwdb	110.52 KB	-rwxr-xr-x
systemd-id128	22.21 KB	-rwxr-xr-x
systemd-inhibit	22.23 KB	-rwxr-xr-x
systemd-machine-id-setup	22.31 KB	-rwxr-xr-x
systemd-mount	50.44 KB	-rwxr-xr-x
systemd-notify	18.22 KB	-rwxr-xr-x
systemd-path	18.21 KB	-rwxr-xr-x
systemd-resolve	126.37 KB	-rwxr-xr-x
systemd-run	54.41 KB	-rwxr-xr-x
systemd-socket-activate	26.22 KB	-rwxr-xr-x
systemd-stdio-bridge	18.22 KB	-rwxr-xr-x
systemd-sysusers	54.52 KB	-rwxr-xr-x
systemd-tmpfiles	86.41 KB	-rwxr-xr-x
systemd-tty-ask-password-agent	30.22 KB	-rwxr-xr-x
systemd-umount	50.44 KB	-rwxr-xr-x
tabs	18.15 KB	-rwxr-xr-x
tac	106.97 KB	-rwxr-xr-x
tail	75.06 KB	-rwxr-xr-x
tar	519.46 KB	-rwxr-xr-x
taskset	34.23 KB	-rwxr-xr-x
tbl	142.35 KB	-rwxr-xr-x
tcpdump	1.2 MB	-rwxr-xr-x
tee	42.88 KB	-rwxr-xr-x
telnet	113.4 KB	-rwxr-xr-x
telnet.netkit	113.4 KB	-rwxr-xr-x
tempfile	14.12 KB	-rwxr-xr-x
test	54.81 KB	-rwxr-xr-x
tic	90.27 KB	-rwxr-xr-x
timedatectl	42.21 KB	-rwxr-xr-x
timeout	43.41 KB	-rwxr-xr-x
tload	14.23 KB	-rwxr-xr-x
toe	22.15 KB	-rwxr-xr-x
top	122.07 KB	-rwxr-xr-x
touch	99.03 KB	-rwxr-xr-x
tput	26.18 KB	-rwxr-xr-x
tr	54.84 KB	-rwxr-xr-x
traceproto	2.82 KB	-rwxr-xr-x
traceproto.db	2.82 KB	-rwxr-xr-x
traceroute	71.16 KB	-rwxr-xr-x
traceroute-nanog	1.58 KB	-rwxr-xr-x
traceroute.db	71.16 KB	-rwxr-xr-x
traceroute6	71.16 KB	-rwxr-xr-x
traceroute6.db	71.16 KB	-rwxr-xr-x
troff	751.75 KB	-rwxr-xr-x
true	38.75 KB	-rwxr-xr-x
truncate	42.81 KB	-rwxr-xr-x
tset	30.16 KB	-rwxr-xr-x
tsort	54.81 KB	-rwxr-xr-x
tty	38.78 KB	-rwxr-xr-x
tzselect	14.99 KB	-rwxr-xr-x
ubuntu-cloudimg-query	8.38 KB	-rwxr-xr-x
ucf	40.91 KB	-rwxr-xr-x
ucfq	18.91 KB	-rwxr-xr-x
ucfr	10.47 KB	-rwxr-xr-x
udevadm	1 MB	-rwxr-xr-x
ul	22.23 KB	-rwxr-xr-x
umount	34.22 KB	-rwsr-xr-x
uname	38.81 KB	-rwxr-xr-x
unattended-upgrade	97.21 KB	-rwxr-xr-x
unattended-upgrades	97.21 KB	-rwxr-xr-x
uncompress	2.29 KB	-rwxr-xr-x
unexpand	42.84 KB	-rwxr-xr-x
uniq	50.91 KB	-rwxr-xr-x
unlink	38.75 KB	-rwxr-xr-x
unlzma	79.29 KB	-rwxr-xr-x
unmkinitramfs	3.59 KB	-rwxr-xr-x
unshare	46.46 KB	-rwxr-xr-x
unxz	79.29 KB	-rwxr-xr-x
update-alternatives	58.09 KB	-rwxr-xr-x
uptime	14.22 KB	-rwxr-xr-x
users	38.81 KB	-rwxr-xr-x
utmpdump	30.23 KB	-rwxr-xr-x
uuidgen	14.23 KB	-rwxr-xr-x
uuidparse	38.23 KB	-rwxr-xr-x
vcs-run	6.75 KB	-rwxr-xr-x
vdir	143.73 KB	-rwxr-xr-x
vi	3.03 MB	-rwxr-xr-x
view	3.03 MB	-rwxr-xr-x
vim	3.03 MB	-rwxr-xr-x
vim.basic	3.03 MB	-rwxr-xr-x
vim.tiny	1.34 MB	-rwxr-xr-x
vimdiff	3.03 MB	-rwxr-xr-x
vimtutor	2.07 KB	-rwxr-xr-x
vmstat	38.24 KB	-rwxr-xr-x
w	22.22 KB	-rwxr-xr-x
wall	34.23 KB	-rwxr-xr-x
watch	26.6 KB	-rwxr-xr-x
watchgnupg	18.15 KB	-rwxr-xr-x
wc	46.95 KB	-rwxr-xr-x
wdctl	62.25 KB	-rwxr-xr-x
wget	527.28 KB	-rwxr-xr-x
whatis	51.2 KB	-rwxr-xr-x
whereis	30.66 KB	-rwxr-xr-x
which	946 B	-rwxr-xr-x
whiptail	26.7 KB	-rwxr-xr-x
who	58.97 KB	-rwxr-xr-x
whoami	38.78 KB	-rwxr-xr-x
write	22.23 KB	-rwxr-xr-x
write-mime-multipart	3.51 KB	-rwxr-xr-x
write.ul	22.23 KB	-rwxr-xr-x
x86_64	26.5 KB	-rwxr-xr-x
xargs	74.37 KB	-rwxr-xr-x
xsubpp	5.04 KB	-rwxr-xr-x
xxd	18.12 KB	-rwxr-xr-x
xz	79.29 KB	-rwxr-xr-x
xzcat	79.29 KB	-rwxr-xr-x
xzcmp	6.86 KB	-rwxr-xr-x
xzdiff	6.86 KB	-rwxr-xr-x
xzegrep	5.87 KB	-rwxr-xr-x
xzfgrep	5.87 KB	-rwxr-xr-x
xzgrep	5.87 KB	-rwxr-xr-x
xzless	1.76 KB	-rwxr-xr-x
xzmore	2.11 KB	-rwxr-xr-x
yes	38.75 KB	-rwxr-xr-x
ypdomainname	22.07 KB	-rwxr-xr-x
zcat	1.94 KB	-rwxr-xr-x
zcmp	1.64 KB	-rwxr-xr-x
zdiff	5.76 KB	-rwxr-xr-x
zdump	22.4 KB	-rwxr-xr-x
zegrep	29 B	-rwxr-xr-x
zfgrep	29 B	-rwxr-xr-x
zforce	2.03 KB	-rwxr-xr-x
zgrep	7.86 KB	-rwxr-xr-x
zipdetails	50.04 KB	-rwxr-xr-x
zless	2.15 KB	-rwxr-xr-x
zmore	1.8 KB	-rwxr-xr-x
znew	4.47 KB	-rwxr-xr-x

Code Editor : pdb3

#! /usr/bin/env python3

"""
The Python Debugger Pdb
=======================

To use the debugger in its simplest form:

>>> import pdb
        >>> pdb.run('<a statement>')

The debugger's prompt is '(Pdb) '.  This will stop in the first
function call in <a statement>.

Alternatively, if a statement terminated with an unhandled exception,
you can use pdb's post-mortem facility to inspect the contents of the
traceback:

>>> <a statement>
        <exception traceback>
        >>> import pdb
        >>> pdb.pm()

The commands recognized by the debugger are listed in the next
section.  Most can be abbreviated as indicated; e.g., h(elp) means
that 'help' can be typed as 'h' or 'help' (but not as 'he' or 'hel',
nor as 'H' or 'Help' or 'HELP').  Optional arguments are enclosed in
square brackets.  Alternatives in the command syntax are separated
by a vertical bar (|).

A blank line repeats the previous command literally, except for
'list', where it lists the next 11 lines.

Commands that the debugger doesn't recognize are assumed to be Python
statements and are executed in the context of the program being
debugged.  Python statements can also be prefixed with an exclamation
point ('!').  This is a powerful way to inspect the program being
debugged; it is even possible to change variables or call functions.
When an exception occurs in such a statement, the exception name is
printed but the debugger's state is not changed.

The debugger supports aliases, which can save typing.  And aliases can
have parameters (see the alias help entry) which allows one a certain
level of adaptability to the context under examination.

Multiple commands may be entered on a single line, separated by the
pair ';;'.  No intelligence is applied to separating the commands; the
input is split at the first ';;', even if it is in the middle of a
quoted string.

If a file ".pdbrc" exists in your home directory or in the current
directory, it is read in and executed as if it had been typed at the
debugger prompt.  This is particularly useful for aliases.  If both
files exist, the one in the home directory is read first and aliases
defined there can be overridden by the local file.  This behavior can be
disabled by passing the "readrc=False" argument to the Pdb constructor.

Aside from aliases, the debugger is not directly programmable; but it
is implemented as a class from which you can derive your own debugger
class, which you can make as fancy as you like.

Debugger commands
=================

"""
# NOTE: the actual command documentation is collected from docstrings of the
# commands and is appended to __doc__ after the class has been defined.

import os
import io
import re
import sys
import cmd
import bdb
import dis
import code
import glob
import pprint
import signal
import inspect
import tokenize
import traceback
import linecache

class Restart(Exception):
    """Causes a debugger to be restarted for the debugged python program."""
    pass

__all__ = ["run", "pm", "Pdb", "runeval", "runctx", "runcall", "set_trace",
           "post_mortem", "help"]

def find_function(funcname, filename):
    cre = re.compile(r'def\s+%s\s*[(]' % re.escape(funcname))
    try:
        fp = tokenize.open(filename)
    except OSError:
        return None
    # consumer of this info expects the first line to be 1
    with fp:
        for lineno, line in enumerate(fp, start=1):
            if cre.match(line):
                return funcname, filename, lineno
    return None

def getsourcelines(obj):
    lines, lineno = inspect.findsource(obj)
    if inspect.isframe(obj) and obj.f_globals is obj.f_locals:
        # must be a module frame: do not try to cut a block out of it
        return lines, 1
    elif inspect.ismodule(obj):
        return lines, 1
    return inspect.getblock(lines[lineno:]), lineno+1

def lasti2lineno(code, lasti):
    linestarts = list(dis.findlinestarts(code))
    linestarts.reverse()
    for i, lineno in linestarts:
        if lasti >= i:
            return lineno
    return 0

class _rstr(str):
    """String that doesn't quote its repr."""
    def __repr__(self):
        return self

# Interaction prompt line will separate file and call info from code
# text using value of line_prefix string.  A newline and arrow may
# be to your liking.  You can set it once pdb is imported using the
# command "pdb.line_prefix = '\n% '".
# line_prefix = ': '    # Use this to get the old situation back
line_prefix = '\n-> '   # Probably a better default

class Pdb(bdb.Bdb, cmd.Cmd):

_previous_sigint_handler = None

def __init__(self, completekey='tab', stdin=None, stdout=None, skip=None,
                 nosigint=False, readrc=True):
        bdb.Bdb.__init__(self, skip=skip)
        cmd.Cmd.__init__(self, completekey, stdin, stdout)
        sys.audit("pdb.Pdb")
        if stdout:
            self.use_rawinput = 0
        self.prompt = '(Pdb) '
        self.aliases = {}
        self.displaying = {}
        self.mainpyfile = ''
        self._wait_for_mainpyfile = False
        self.tb_lineno = {}
        # Try to load readline if it exists
        try:
            import readline
            # remove some common file name delimiters
            readline.set_completer_delims(' \t\n`@#$%^&*()=+[{]}\\|;:\'",<>?')
        except ImportError:
            pass
        self.allow_kbdint = False
        self.nosigint = nosigint

# Read ~/.pdbrc and ./.pdbrc
        self.rcLines = []
        if readrc:
            try:
                with open(os.path.expanduser('~/.pdbrc')) as rcFile:
                    self.rcLines.extend(rcFile)
            except OSError:
                pass
            try:
                with open(".pdbrc") as rcFile:
                    self.rcLines.extend(rcFile)
            except OSError:
                pass

self.commands = {} # associates a command list to breakpoint numbers
        self.commands_doprompt = {} # for each bp num, tells if the prompt
                                    # must be disp. after execing the cmd list
        self.commands_silent = {} # for each bp num, tells if the stack trace
                                  # must be disp. after execing the cmd list
        self.commands_defining = False # True while in the process of defining
                                       # a command list
        self.commands_bnum = None # The breakpoint number for which we are
                                  # defining a list

def sigint_handler(self, signum, frame):
        if self.allow_kbdint:
            raise KeyboardInterrupt
        self.message("\nProgram interrupted. (Use 'cont' to resume).")
        self.set_step()
        self.set_trace(frame)

def reset(self):
        bdb.Bdb.reset(self)
        self.forget()

def forget(self):
        self.lineno = None
        self.stack = []
        self.curindex = 0
        self.curframe = None
        self.tb_lineno.clear()

def setup(self, f, tb):
        self.forget()
        self.stack, self.curindex = self.get_stack(f, tb)
        while tb:
            # when setting up post-mortem debugging with a traceback, save all
            # the original line numbers to be displayed along the current line
            # numbers (which can be different, e.g. due to finally clauses)
            lineno = lasti2lineno(tb.tb_frame.f_code, tb.tb_lasti)
            self.tb_lineno[tb.tb_frame] = lineno
            tb = tb.tb_next
        self.curframe = self.stack[self.curindex][0]
        # The f_locals dictionary is updated from the actual frame
        # locals whenever the .f_locals accessor is called, so we
        # cache it here to ensure that modifications are not overwritten.
        self.curframe_locals = self.curframe.f_locals
        return self.execRcLines()

# Can be executed earlier than 'setup' if desired
    def execRcLines(self):
        if not self.rcLines:
            return
        # local copy because of recursion
        rcLines = self.rcLines
        rcLines.reverse()
        # execute every line only once
        self.rcLines = []
        while rcLines:
            line = rcLines.pop().strip()
            if line and line[0] != '#':
                if self.onecmd(line):
                    # if onecmd returns True, the command wants to exit
                    # from the interaction, save leftover rc lines
                    # to execute before next interaction
                    self.rcLines += reversed(rcLines)
                    return True

# Override Bdb methods

def user_call(self, frame, argument_list):
        """This method is called when there is the remote possibility
        that we ever need to stop in this function."""
        if self._wait_for_mainpyfile:
            return
        if self.stop_here(frame):
            self.message('--Call--')
            self.interaction(frame, None)

def user_line(self, frame):
        """This function is called when we stop or break at this line."""
        if self._wait_for_mainpyfile:
            if (self.mainpyfile != self.canonic(frame.f_code.co_filename)
                or frame.f_lineno <= 0):
                return
            self._wait_for_mainpyfile = False
        if self.bp_commands(frame):
            self.interaction(frame, None)

def bp_commands(self, frame):
        """Call every command that was set for the current active breakpoint
        (if there is one).

Returns True if the normal interaction function must be called,
        False otherwise."""
        # self.currentbp is set in bdb in Bdb.break_here if a breakpoint was hit
        if getattr(self, "currentbp", False) and \
               self.currentbp in self.commands:
            currentbp = self.currentbp
            self.currentbp = 0
            lastcmd_back = self.lastcmd
            self.setup(frame, None)
            for line in self.commands[currentbp]:
                self.onecmd(line)
            self.lastcmd = lastcmd_back
            if not self.commands_silent[currentbp]:
                self.print_stack_entry(self.stack[self.curindex])
            if self.commands_doprompt[currentbp]:
                self._cmdloop()
            self.forget()
            return
        return 1

def user_return(self, frame, return_value):
        """This function is called when a return trap is set here."""
        if self._wait_for_mainpyfile:
            return
        frame.f_locals['__return__'] = return_value
        self.message('--Return--')
        self.interaction(frame, None)

def user_exception(self, frame, exc_info):
        """This function is called if an exception occurs,
        but only if we are to stop at or just below this level."""
        if self._wait_for_mainpyfile:
            return
        exc_type, exc_value, exc_traceback = exc_info
        frame.f_locals['__exception__'] = exc_type, exc_value

# An 'Internal StopIteration' exception is an exception debug event
        # issued by the interpreter when handling a subgenerator run with
        # 'yield from' or a generator controlled by a for loop. No exception has
        # actually occurred in this case. The debugger uses this debug event to
        # stop when the debuggee is returning from such generators.
        prefix = 'Internal ' if (not exc_traceback
                                    and exc_type is StopIteration) else ''
        self.message('%s%s' % (prefix,
            traceback.format_exception_only(exc_type, exc_value)[-1].strip()))
        self.interaction(frame, exc_traceback)

# General interaction function
    def _cmdloop(self):
        while True:
            try:
                # keyboard interrupts allow for an easy way to cancel
                # the current command, so allow them during interactive input
                self.allow_kbdint = True
                self.cmdloop()
                self.allow_kbdint = False
                break
            except KeyboardInterrupt:
                self.message('--KeyboardInterrupt--')

# Called before loop, handles display expressions
    def preloop(self):
        displaying = self.displaying.get(self.curframe)
        if displaying:
            for expr, oldvalue in displaying.items():
                newvalue = self._getval_except(expr)
                # check for identity first; this prevents custom __eq__ to
                # be called at every loop, and also prevents instances whose
                # fields are changed to be displayed
                if newvalue is not oldvalue and newvalue != oldvalue:
                    displaying[expr] = newvalue
                    self.message('display %s: %r  [old: %r]' %
                                 (expr, newvalue, oldvalue))

def interaction(self, frame, traceback):
        # Restore the previous signal handler at the Pdb prompt.
        if Pdb._previous_sigint_handler:
            try:
                signal.signal(signal.SIGINT, Pdb._previous_sigint_handler)
            except ValueError:  # ValueError: signal only works in main thread
                pass
            else:
                Pdb._previous_sigint_handler = None
        if self.setup(frame, traceback):
            # no interaction desired at this time (happens if .pdbrc contains
            # a command like "continue")
            self.forget()
            return
        self.print_stack_entry(self.stack[self.curindex])
        self._cmdloop()
        self.forget()

def displayhook(self, obj):
        """Custom displayhook for the exec in default(), which prevents
        assignment of the _ variable in the builtins.
        """
        # reproduce the behavior of the standard displayhook, not printing None
        if obj is not None:
            self.message(repr(obj))

def default(self, line):
        if line[:1] == '!': line = line[1:]
        locals = self.curframe_locals
        globals = self.curframe.f_globals
        try:
            code = compile(line + '\n', '<stdin>', 'single')
            save_stdout = sys.stdout
            save_stdin = sys.stdin
            save_displayhook = sys.displayhook
            try:
                sys.stdin = self.stdin
                sys.stdout = self.stdout
                sys.displayhook = self.displayhook
                exec(code, globals, locals)
            finally:
                sys.stdout = save_stdout
                sys.stdin = save_stdin
                sys.displayhook = save_displayhook
        except:
            exc_info = sys.exc_info()[:2]
            self.error(traceback.format_exception_only(*exc_info)[-1].strip())

def precmd(self, line):
        """Handle alias expansion and ';;' separator."""
        if not line.strip():
            return line
        args = line.split()
        while args[0] in self.aliases:
            line = self.aliases[args[0]]
            ii = 1
            for tmpArg in args[1:]:
                line = line.replace("%" + str(ii),
                                      tmpArg)
                ii += 1
            line = line.replace("%*", ' '.join(args[1:]))
            args = line.split()
        # split into ';;' separated commands
        # unless it's an alias command
        if args[0] != 'alias':
            marker = line.find(';;')
            if marker >= 0:
                # queue up everything after marker
                next = line[marker+2:].lstrip()
                self.cmdqueue.append(next)
                line = line[:marker].rstrip()
        return line

def onecmd(self, line):
        """Interpret the argument as though it had been typed in response
        to the prompt.

Checks whether this line is typed at the normal prompt or in
        a breakpoint command list definition.
        """
        if not self.commands_defining:
            return cmd.Cmd.onecmd(self, line)
        else:
            return self.handle_command_def(line)

def handle_command_def(self, line):
        """Handles one command line during command list definition."""
        cmd, arg, line = self.parseline(line)
        if not cmd:
            return
        if cmd == 'silent':
            self.commands_silent[self.commands_bnum] = True
            return # continue to handle other cmd def in the cmd list
        elif cmd == 'end':
            self.cmdqueue = []
            return 1 # end of cmd list
        cmdlist = self.commands[self.commands_bnum]
        if arg:
            cmdlist.append(cmd+' '+arg)
        else:
            cmdlist.append(cmd)
        # Determine if we must stop
        try:
            func = getattr(self, 'do_' + cmd)
        except AttributeError:
            func = self.default
        # one of the resuming commands
        if func.__name__ in self.commands_resuming:
            self.commands_doprompt[self.commands_bnum] = False
            self.cmdqueue = []
            return 1
        return

# interface abstraction functions

def message(self, msg):
        print(msg, file=self.stdout)

def error(self, msg):
        print('***', msg, file=self.stdout)

# Generic completion functions.  Individual complete_foo methods can be
    # assigned below to one of these functions.

def _complete_location(self, text, line, begidx, endidx):
        # Complete a file/module/function location for break/tbreak/clear.
        if line.strip().endswith((':', ',')):
            # Here comes a line number or a condition which we can't complete.
            return []
        # First, try to find matching functions (i.e. expressions).
        try:
            ret = self._complete_expression(text, line, begidx, endidx)
        except Exception:
            ret = []
        # Then, try to complete file names as well.
        globs = glob.glob(glob.escape(text) + '*')
        for fn in globs:
            if os.path.isdir(fn):
                ret.append(fn + '/')
            elif os.path.isfile(fn) and fn.lower().endswith(('.py', '.pyw')):
                ret.append(fn + ':')
        return ret

def _complete_bpnumber(self, text, line, begidx, endidx):
        # Complete a breakpoint number.  (This would be more helpful if we could
        # display additional info along with the completions, such as file/line
        # of the breakpoint.)
        return [str(i) for i, bp in enumerate(bdb.Breakpoint.bpbynumber)
                if bp is not None and str(i).startswith(text)]

def _complete_expression(self, text, line, begidx, endidx):
        # Complete an arbitrary expression.
        if not self.curframe:
            return []
        # Collect globals and locals.  It is usually not really sensible to also
        # complete builtins, and they clutter the namespace quite heavily, so we
        # leave them out.
        ns = {**self.curframe.f_globals, **self.curframe_locals}
        if '.' in text:
            # Walk an attribute chain up to the last part, similar to what
            # rlcompleter does.  This will bail if any of the parts are not
            # simple attribute access, which is what we want.
            dotted = text.split('.')
            try:
                obj = ns[dotted[0]]
                for part in dotted[1:-1]:
                    obj = getattr(obj, part)
            except (KeyError, AttributeError):
                return []
            prefix = '.'.join(dotted[:-1]) + '.'
            return [prefix + n for n in dir(obj) if n.startswith(dotted[-1])]
        else:
            # Complete a simple name.
            return [n for n in ns.keys() if n.startswith(text)]

# Command definitions, called by cmdloop()
    # The argument is the remaining string on the command line
    # Return true to exit from the command loop

def do_commands(self, arg):
        """commands [bpnumber]
        (com) ...
        (com) end
        (Pdb)

Specify a list of commands for breakpoint number bpnumber.
        The commands themselves are entered on the following lines.
        Type a line containing just 'end' to terminate the commands.
        The commands are executed when the breakpoint is hit.

To remove all commands from a breakpoint, type commands and
        follow it immediately with end; that is, give no commands.

With no bpnumber argument, commands refers to the last
        breakpoint set.

You can use breakpoint commands to start your program up
        again.  Simply use the continue command, or step, or any other
        command that resumes execution.

Specifying any command resuming execution (currently continue,
        step, next, return, jump, quit and their abbreviations)
        terminates the command list (as if that command was
        immediately followed by end).  This is because any time you
        resume execution (even with a simple next or step), you may
        encounter another breakpoint -- which could have its own
        command list, leading to ambiguities about which list to
        execute.

If you use the 'silent' command in the command list, the usual
        message about stopping at a breakpoint is not printed.  This
        may be desirable for breakpoints that are to print a specific
        message and then continue.  If none of the other commands
        print anything, you will see no sign that the breakpoint was
        reached.
        """
        if not arg:
            bnum = len(bdb.Breakpoint.bpbynumber) - 1
        else:
            try:
                bnum = int(arg)
            except:
                self.error("Usage: commands [bnum]\n        ...\n        end")
                return
        self.commands_bnum = bnum
        # Save old definitions for the case of a keyboard interrupt.
        if bnum in self.commands:
            old_command_defs = (self.commands[bnum],
                                self.commands_doprompt[bnum],
                                self.commands_silent[bnum])
        else:
            old_command_defs = None
        self.commands[bnum] = []
        self.commands_doprompt[bnum] = True
        self.commands_silent[bnum] = False

prompt_back = self.prompt
        self.prompt = '(com) '
        self.commands_defining = True
        try:
            self.cmdloop()
        except KeyboardInterrupt:
            # Restore old definitions.
            if old_command_defs:
                self.commands[bnum] = old_command_defs[0]
                self.commands_doprompt[bnum] = old_command_defs[1]
                self.commands_silent[bnum] = old_command_defs[2]
            else:
                del self.commands[bnum]
                del self.commands_doprompt[bnum]
                del self.commands_silent[bnum]
            self.error('command definition aborted, old commands restored')
        finally:
            self.commands_defining = False
            self.prompt = prompt_back

complete_commands = _complete_bpnumber

def do_break(self, arg, temporary = 0):
        """b(reak) [ ([filename:]lineno | function) [, condition] ]
        Without argument, list all breaks.

With a line number argument, set a break at this line in the
        current file.  With a function name, set a break at the first
        executable line of that function.  If a second argument is
        present, it is a string specifying an expression which must
        evaluate to true before the breakpoint is honored.

The line number may be prefixed with a filename and a colon,
        to specify a breakpoint in another file (probably one that
        hasn't been loaded yet).  The file is searched for on
        sys.path; the .py suffix may be omitted.
        """
        if not arg:
            if self.breaks:  # There's at least one
                self.message("Num Type         Disp Enb   Where")
                for bp in bdb.Breakpoint.bpbynumber:
                    if bp:
                        self.message(bp.bpformat())
            return
        # parse arguments; comma has lowest precedence
        # and cannot occur in filename
        filename = None
        lineno = None
        cond = None
        comma = arg.find(',')
        if comma > 0:
            # parse stuff after comma: "condition"
            cond = arg[comma+1:].lstrip()
            arg = arg[:comma].rstrip()
        # parse stuff before comma: [filename:]lineno | function
        colon = arg.rfind(':')
        funcname = None
        if colon >= 0:
            filename = arg[:colon].rstrip()
            f = self.lookupmodule(filename)
            if not f:
                self.error('%r not found from sys.path' % filename)
                return
            else:
                filename = f
            arg = arg[colon+1:].lstrip()
            try:
                lineno = int(arg)
            except ValueError:
                self.error('Bad lineno: %s' % arg)
                return
        else:
            # no colon; can be lineno or function
            try:
                lineno = int(arg)
            except ValueError:
                try:
                    func = eval(arg,
                                self.curframe.f_globals,
                                self.curframe_locals)
                except:
                    func = arg
                try:
                    if hasattr(func, '__func__'):
                        func = func.__func__
                    code = func.__code__
                    #use co_name to identify the bkpt (function names
                    #could be aliased, but co_name is invariant)
                    funcname = code.co_name
                    lineno = code.co_firstlineno
                    filename = code.co_filename
                except:
                    # last thing to try
                    (ok, filename, ln) = self.lineinfo(arg)
                    if not ok:
                        self.error('The specified object %r is not a function '
                                   'or was not found along sys.path.' % arg)
                        return
                    funcname = ok # ok contains a function name
                    lineno = int(ln)
        if not filename:
            filename = self.defaultFile()
        # Check for reasonable breakpoint
        line = self.checkline(filename, lineno)
        if line:
            # now set the break point
            err = self.set_break(filename, line, temporary, cond, funcname)
            if err:
                self.error(err)
            else:
                bp = self.get_breaks(filename, line)[-1]
                self.message("Breakpoint %d at %s:%d" %
                             (bp.number, bp.file, bp.line))

# To be overridden in derived debuggers
    def defaultFile(self):
        """Produce a reasonable default."""
        filename = self.curframe.f_code.co_filename
        if filename == '<string>' and self.mainpyfile:
            filename = self.mainpyfile
        return filename

do_b = do_break

complete_break = _complete_location
    complete_b = _complete_location

def do_tbreak(self, arg):
        """tbreak [ ([filename:]lineno | function) [, condition] ]
        Same arguments as break, but sets a temporary breakpoint: it
        is automatically deleted when first hit.
        """
        self.do_break(arg, 1)

complete_tbreak = _complete_location

def lineinfo(self, identifier):
        failed = (None, None, None)
        # Input is identifier, may be in single quotes
        idstring = identifier.split("'")
        if len(idstring) == 1:
            # not in single quotes
            id = idstring[0].strip()
        elif len(idstring) == 3:
            # quoted
            id = idstring[1].strip()
        else:
            return failed
        if id == '': return failed
        parts = id.split('.')
        # Protection for derived debuggers
        if parts[0] == 'self':
            del parts[0]
            if len(parts) == 0:
                return failed
        # Best first guess at file to look at
        fname = self.defaultFile()
        if len(parts) == 1:
            item = parts[0]
        else:
            # More than one part.
            # First is module, second is method/class
            f = self.lookupmodule(parts[0])
            if f:
                fname = f
            item = parts[1]
        answer = find_function(item, fname)
        return answer or failed

def checkline(self, filename, lineno):
        """Check whether specified line seems to be executable.

Return `lineno` if it is, 0 if not (e.g. a docstring, comment, blank
        line or EOF). Warning: testing is not comprehensive.
        """
        # this method should be callable before starting debugging, so default
        # to "no globals" if there is no current frame
        globs = self.curframe.f_globals if hasattr(self, 'curframe') else None
        line = linecache.getline(filename, lineno, globs)
        if not line:
            self.message('End of file')
            return 0
        line = line.strip()
        # Don't allow setting breakpoint at a blank line
        if (not line or (line[0] == '#') or
             (line[:3] == '"""') or line[:3] == "'''"):
            self.error('Blank or comment')
            return 0
        return lineno

def do_enable(self, arg):
        """enable bpnumber [bpnumber ...]
        Enables the breakpoints given as a space separated list of
        breakpoint numbers.
        """
        args = arg.split()
        for i in args:
            try:
                bp = self.get_bpbynumber(i)
            except ValueError as err:
                self.error(err)
            else:
                bp.enable()
                self.message('Enabled %s' % bp)

complete_enable = _complete_bpnumber

def do_disable(self, arg):
        """disable bpnumber [bpnumber ...]
        Disables the breakpoints given as a space separated list of
        breakpoint numbers.  Disabling a breakpoint means it cannot
        cause the program to stop execution, but unlike clearing a
        breakpoint, it remains in the list of breakpoints and can be
        (re-)enabled.
        """
        args = arg.split()
        for i in args:
            try:
                bp = self.get_bpbynumber(i)
            except ValueError as err:
                self.error(err)
            else:
                bp.disable()
                self.message('Disabled %s' % bp)

complete_disable = _complete_bpnumber

def do_condition(self, arg):
        """condition bpnumber [condition]
        Set a new condition for the breakpoint, an expression which
        must evaluate to true before the breakpoint is honored.  If
        condition is absent, any existing condition is removed; i.e.,
        the breakpoint is made unconditional.
        """
        args = arg.split(' ', 1)
        try:
            cond = args[1]
        except IndexError:
            cond = None
        try:
            bp = self.get_bpbynumber(args[0].strip())
        except IndexError:
            self.error('Breakpoint number expected')
        except ValueError as err:
            self.error(err)
        else:
            bp.cond = cond
            if not cond:
                self.message('Breakpoint %d is now unconditional.' % bp.number)
            else:
                self.message('New condition set for breakpoint %d.' % bp.number)

complete_condition = _complete_bpnumber

def do_ignore(self, arg):
        """ignore bpnumber [count]
        Set the ignore count for the given breakpoint number.  If
        count is omitted, the ignore count is set to 0.  A breakpoint
        becomes active when the ignore count is zero.  When non-zero,
        the count is decremented each time the breakpoint is reached
        and the breakpoint is not disabled and any associated
        condition evaluates to true.
        """
        args = arg.split()
        try:
            count = int(args[1].strip())
        except:
            count = 0
        try:
            bp = self.get_bpbynumber(args[0].strip())
        except IndexError:
            self.error('Breakpoint number expected')
        except ValueError as err:
            self.error(err)
        else:
            bp.ignore = count
            if count > 0:
                if count > 1:
                    countstr = '%d crossings' % count
                else:
                    countstr = '1 crossing'
                self.message('Will ignore next %s of breakpoint %d.' %
                             (countstr, bp.number))
            else:
                self.message('Will stop next time breakpoint %d is reached.'
                             % bp.number)

complete_ignore = _complete_bpnumber

def do_clear(self, arg):
        """cl(ear) filename:lineno\ncl(ear) [bpnumber [bpnumber...]]
        With a space separated list of breakpoint numbers, clear
        those breakpoints.  Without argument, clear all breaks (but
        first ask confirmation).  With a filename:lineno argument,
        clear all breaks at that line in that file.
        """
        if not arg:
            try:
                reply = input('Clear all breaks? ')
            except EOFError:
                reply = 'no'
            reply = reply.strip().lower()
            if reply in ('y', 'yes'):
                bplist = [bp for bp in bdb.Breakpoint.bpbynumber if bp]
                self.clear_all_breaks()
                for bp in bplist:
                    self.message('Deleted %s' % bp)
            return
        if ':' in arg:
            # Make sure it works for "clear C:\foo\bar.py:12"
            i = arg.rfind(':')
            filename = arg[:i]
            arg = arg[i+1:]
            try:
                lineno = int(arg)
            except ValueError:
                err = "Invalid line number (%s)" % arg
            else:
                bplist = self.get_breaks(filename, lineno)
                err = self.clear_break(filename, lineno)
            if err:
                self.error(err)
            else:
                for bp in bplist:
                    self.message('Deleted %s' % bp)
            return
        numberlist = arg.split()
        for i in numberlist:
            try:
                bp = self.get_bpbynumber(i)
            except ValueError as err:
                self.error(err)
            else:
                self.clear_bpbynumber(i)
                self.message('Deleted %s' % bp)
    do_cl = do_clear # 'c' is already an abbreviation for 'continue'

complete_clear = _complete_location
    complete_cl = _complete_location

def do_where(self, arg):
        """w(here)
        Print a stack trace, with the most recent frame at the bottom.
        An arrow indicates the "current frame", which determines the
        context of most commands.  'bt' is an alias for this command.
        """
        self.print_stack_trace()
    do_w = do_where
    do_bt = do_where

def _select_frame(self, number):
        assert 0 <= number < len(self.stack)
        self.curindex = number
        self.curframe = self.stack[self.curindex][0]
        self.curframe_locals = self.curframe.f_locals
        self.print_stack_entry(self.stack[self.curindex])
        self.lineno = None

def do_up(self, arg):
        """u(p) [count]
        Move the current frame count (default one) levels up in the
        stack trace (to an older frame).
        """
        if self.curindex == 0:
            self.error('Oldest frame')
            return
        try:
            count = int(arg or 1)
        except ValueError:
            self.error('Invalid frame count (%s)' % arg)
            return
        if count < 0:
            newframe = 0
        else:
            newframe = max(0, self.curindex - count)
        self._select_frame(newframe)
    do_u = do_up

def do_down(self, arg):
        """d(own) [count]
        Move the current frame count (default one) levels down in the
        stack trace (to a newer frame).
        """
        if self.curindex + 1 == len(self.stack):
            self.error('Newest frame')
            return
        try:
            count = int(arg or 1)
        except ValueError:
            self.error('Invalid frame count (%s)' % arg)
            return
        if count < 0:
            newframe = len(self.stack) - 1
        else:
            newframe = min(len(self.stack) - 1, self.curindex + count)
        self._select_frame(newframe)
    do_d = do_down

def do_until(self, arg):
        """unt(il) [lineno]
        Without argument, continue execution until the line with a
        number greater than the current one is reached.  With a line
        number, continue execution until a line with a number greater
        or equal to that is reached.  In both cases, also stop when
        the current frame returns.
        """
        if arg:
            try:
                lineno = int(arg)
            except ValueError:
                self.error('Error in argument: %r' % arg)
                return
            if lineno <= self.curframe.f_lineno:
                self.error('"until" line number is smaller than current '
                           'line number')
                return
        else:
            lineno = None
        self.set_until(self.curframe, lineno)
        return 1
    do_unt = do_until

def do_step(self, arg):
        """s(tep)
        Execute the current line, stop at the first possible occasion
        (either in a function that is called or in the current
        function).
        """
        self.set_step()
        return 1
    do_s = do_step

def do_next(self, arg):
        """n(ext)
        Continue execution until the next line in the current function
        is reached or it returns.
        """
        self.set_next(self.curframe)
        return 1
    do_n = do_next

def do_run(self, arg):
        """run [args...]
        Restart the debugged python program. If a string is supplied
        it is split with "shlex", and the result is used as the new
        sys.argv.  History, breakpoints, actions and debugger options
        are preserved.  "restart" is an alias for "run".
        """
        if arg:
            import shlex
            argv0 = sys.argv[0:1]
            sys.argv = shlex.split(arg)
            sys.argv[:0] = argv0
        # this is caught in the main debugger loop
        raise Restart

do_restart = do_run

def do_return(self, arg):
        """r(eturn)
        Continue execution until the current function returns.
        """
        self.set_return(self.curframe)
        return 1
    do_r = do_return

def do_continue(self, arg):
        """c(ont(inue))
        Continue execution, only stop when a breakpoint is encountered.
        """
        if not self.nosigint:
            try:
                Pdb._previous_sigint_handler = \
                    signal.signal(signal.SIGINT, self.sigint_handler)
            except ValueError:
                # ValueError happens when do_continue() is invoked from
                # a non-main thread in which case we just continue without
                # SIGINT set. Would printing a message here (once) make
                # sense?
                pass
        self.set_continue()
        return 1
    do_c = do_cont = do_continue

def do_jump(self, arg):
        """j(ump) lineno
        Set the next line that will be executed.  Only available in
        the bottom-most frame.  This lets you jump back and execute
        code again, or jump forward to skip code that you don't want
        to run.

It should be noted that not all jumps are allowed -- for
        instance it is not possible to jump into the middle of a
        for loop or out of a finally clause.
        """
        if self.curindex + 1 != len(self.stack):
            self.error('You can only jump within the bottom frame')
            return
        try:
            arg = int(arg)
        except ValueError:
            self.error("The 'jump' command requires a line number")
        else:
            try:
                # Do the jump, fix up our copy of the stack, and display the
                # new position
                self.curframe.f_lineno = arg
                self.stack[self.curindex] = self.stack[self.curindex][0], arg
                self.print_stack_entry(self.stack[self.curindex])
            except ValueError as e:
                self.error('Jump failed: %s' % e)
    do_j = do_jump

def do_debug(self, arg):
        """debug code
        Enter a recursive debugger that steps through the code
        argument (which is an arbitrary expression or statement to be
        executed in the current environment).
        """
        sys.settrace(None)
        globals = self.curframe.f_globals
        locals = self.curframe_locals
        p = Pdb(self.completekey, self.stdin, self.stdout)
        p.prompt = "(%s) " % self.prompt.strip()
        self.message("ENTERING RECURSIVE DEBUGGER")
        try:
            sys.call_tracing(p.run, (arg, globals, locals))
        except Exception:
            exc_info = sys.exc_info()[:2]
            self.error(traceback.format_exception_only(*exc_info)[-1].strip())
        self.message("LEAVING RECURSIVE DEBUGGER")
        sys.settrace(self.trace_dispatch)
        self.lastcmd = p.lastcmd

complete_debug = _complete_expression

def do_quit(self, arg):
        """q(uit)\nexit
        Quit from the debugger. The program being executed is aborted.
        """
        self._user_requested_quit = True
        self.set_quit()
        return 1

do_q = do_quit
    do_exit = do_quit

def do_EOF(self, arg):
        """EOF
        Handles the receipt of EOF as a command.
        """
        self.message('')
        self._user_requested_quit = True
        self.set_quit()
        return 1

def do_args(self, arg):
        """a(rgs)
        Print the argument list of the current function.
        """
        co = self.curframe.f_code
        dict = self.curframe_locals
        n = co.co_argcount + co.co_kwonlyargcount
        if co.co_flags & inspect.CO_VARARGS: n = n+1
        if co.co_flags & inspect.CO_VARKEYWORDS: n = n+1
        for i in range(n):
            name = co.co_varnames[i]
            if name in dict:
                self.message('%s = %r' % (name, dict[name]))
            else:
                self.message('%s = *** undefined ***' % (name,))
    do_a = do_args

def do_retval(self, arg):
        """retval
        Print the return value for the last return of a function.
        """
        if '__return__' in self.curframe_locals:
            self.message(repr(self.curframe_locals['__return__']))
        else:
            self.error('Not yet returned!')
    do_rv = do_retval

def _getval(self, arg):
        try:
            return eval(arg, self.curframe.f_globals, self.curframe_locals)
        except:
            exc_info = sys.exc_info()[:2]
            self.error(traceback.format_exception_only(*exc_info)[-1].strip())
            raise

def _getval_except(self, arg, frame=None):
        try:
            if frame is None:
                return eval(arg, self.curframe.f_globals, self.curframe_locals)
            else:
                return eval(arg, frame.f_globals, frame.f_locals)
        except:
            exc_info = sys.exc_info()[:2]
            err = traceback.format_exception_only(*exc_info)[-1].strip()
            return _rstr('** raised %s **' % err)

def do_p(self, arg):
        """p expression
        Print the value of the expression.
        """
        try:
            self.message(repr(self._getval(arg)))
        except:
            pass

def do_pp(self, arg):
        """pp expression
        Pretty-print the value of the expression.
        """
        try:
            self.message(pprint.pformat(self._getval(arg)))
        except:
            pass

complete_print = _complete_expression
    complete_p = _complete_expression
    complete_pp = _complete_expression

def do_list(self, arg):
        """l(ist) [first [,last] | .]

List source code for the current file.  Without arguments,
        list 11 lines around the current line or continue the previous
        listing.  With . as argument, list 11 lines around the current
        line.  With one argument, list 11 lines starting at that line.
        With two arguments, list the given range; if the second
        argument is less than the first, it is a count.

The current line in the current frame is indicated by "->".
        If an exception is being debugged, the line where the
        exception was originally raised or propagated is indicated by
        ">>", if it differs from the current line.
        """
        self.lastcmd = 'list'
        last = None
        if arg and arg != '.':
            try:
                if ',' in arg:
                    first, last = arg.split(',')
                    first = int(first.strip())
                    last = int(last.strip())
                    if last < first:
                        # assume it's a count
                        last = first + last
                else:
                    first = int(arg.strip())
                    first = max(1, first - 5)
            except ValueError:
                self.error('Error in argument: %r' % arg)
                return
        elif self.lineno is None or arg == '.':
            first = max(1, self.curframe.f_lineno - 5)
        else:
            first = self.lineno + 1
        if last is None:
            last = first + 10
        filename = self.curframe.f_code.co_filename
        breaklist = self.get_file_breaks(filename)
        try:
            lines = linecache.getlines(filename, self.curframe.f_globals)
            self._print_lines(lines[first-1:last], first, breaklist,
                              self.curframe)
            self.lineno = min(last, len(lines))
            if len(lines) < last:
                self.message('[EOF]')
        except KeyboardInterrupt:
            pass
    do_l = do_list

def do_longlist(self, arg):
        """longlist | ll
        List the whole source code for the current function or frame.
        """
        filename = self.curframe.f_code.co_filename
        breaklist = self.get_file_breaks(filename)
        try:
            lines, lineno = getsourcelines(self.curframe)
        except OSError as err:
            self.error(err)
            return
        self._print_lines(lines, lineno, breaklist, self.curframe)
    do_ll = do_longlist

def do_source(self, arg):
        """source expression
        Try to get source code for the given object and display it.
        """
        try:
            obj = self._getval(arg)
        except:
            return
        try:
            lines, lineno = getsourcelines(obj)
        except (OSError, TypeError) as err:
            self.error(err)
            return
        self._print_lines(lines, lineno)

complete_source = _complete_expression

def _print_lines(self, lines, start, breaks=(), frame=None):
        """Print a range of lines."""
        if frame:
            current_lineno = frame.f_lineno
            exc_lineno = self.tb_lineno.get(frame, -1)
        else:
            current_lineno = exc_lineno = -1
        for lineno, line in enumerate(lines, start):
            s = str(lineno).rjust(3)
            if len(s) < 4:
                s += ' '
            if lineno in breaks:
                s += 'B'
            else:
                s += ' '
            if lineno == current_lineno:
                s += '->'
            elif lineno == exc_lineno:
                s += '>>'
            self.message(s + '\t' + line.rstrip())

def do_whatis(self, arg):
        """whatis arg
        Print the type of the argument.
        """
        try:
            value = self._getval(arg)
        except:
            # _getval() already printed the error
            return
        code = None
        # Is it an instance method?
        try:
            code = value.__func__.__code__
        except Exception:
            pass
        if code:
            self.message('Method %s' % code.co_name)
            return
        # Is it a function?
        try:
            code = value.__code__
        except Exception:
            pass
        if code:
            self.message('Function %s' % code.co_name)
            return
        # Is it a class?
        if value.__class__ is type:
            self.message('Class %s.%s' % (value.__module__, value.__qualname__))
            return
        # None of the above...
        self.message(type(value))

complete_whatis = _complete_expression

def do_display(self, arg):
        """display [expression]

Display the value of the expression if it changed, each time execution
        stops in the current frame.

Without expression, list all display expressions for the current frame.
        """
        if not arg:
            self.message('Currently displaying:')
            for item in self.displaying.get(self.curframe, {}).items():
                self.message('%s: %r' % item)
        else:
            val = self._getval_except(arg)
            self.displaying.setdefault(self.curframe, {})[arg] = val
            self.message('display %s: %r' % (arg, val))

complete_display = _complete_expression

def do_undisplay(self, arg):
        """undisplay [expression]

Do not display the expression any more in the current frame.

Without expression, clear all display expressions for the current frame.
        """
        if arg:
            try:
                del self.displaying.get(self.curframe, {})[arg]
            except KeyError:
                self.error('not displaying %s' % arg)
        else:
            self.displaying.pop(self.curframe, None)

def complete_undisplay(self, text, line, begidx, endidx):
        return [e for e in self.displaying.get(self.curframe, {})
                if e.startswith(text)]

def do_interact(self, arg):
        """interact

Start an interactive interpreter whose global namespace
        contains all the (global and local) names found in the current scope.
        """
        ns = {**self.curframe.f_globals, **self.curframe_locals}
        code.interact("*interactive*", local=ns)

def do_alias(self, arg):
        """alias [name [command [parameter parameter ...] ]]
        Create an alias called 'name' that executes 'command'.  The
        command must *not* be enclosed in quotes.  Replaceable
        parameters can be indicated by %1, %2, and so on, while %* is
        replaced by all the parameters.  If no command is given, the
        current alias for name is shown. If no name is given, all
        aliases are listed.

Aliases may be nested and can contain anything that can be
        legally typed at the pdb prompt.  Note!  You *can* override
        internal pdb commands with aliases!  Those internal commands
        are then hidden until the alias is removed.  Aliasing is
        recursively applied to the first word of the command line; all
        other words in the line are left alone.

As an example, here are two useful aliases (especially when
        placed in the .pdbrc file):

# Print instance variables (usage "pi classInst")
        alias pi for k in %1.__dict__.keys(): print("%1.",k,"=",%1.__dict__[k])
        # Print instance variables in self
        alias ps pi self
        """
        args = arg.split()
        if len(args) == 0:
            keys = sorted(self.aliases.keys())
            for alias in keys:
                self.message("%s = %s" % (alias, self.aliases[alias]))
            return
        if args[0] in self.aliases and len(args) == 1:
            self.message("%s = %s" % (args[0], self.aliases[args[0]]))
        else:
            self.aliases[args[0]] = ' '.join(args[1:])

def do_unalias(self, arg):
        """unalias name
        Delete the specified alias.
        """
        args = arg.split()
        if len(args) == 0: return
        if args[0] in self.aliases:
            del self.aliases[args[0]]

def complete_unalias(self, text, line, begidx, endidx):
        return [a for a in self.aliases if a.startswith(text)]

# List of all the commands making the program resume execution.
    commands_resuming = ['do_continue', 'do_step', 'do_next', 'do_return',
                         'do_quit', 'do_jump']

# Print a traceback starting at the top stack frame.
    # The most recently entered frame is printed last;
    # this is different from dbx and gdb, but consistent with
    # the Python interpreter's stack trace.
    # It is also consistent with the up/down commands (which are
    # compatible with dbx and gdb: up moves towards 'main()'
    # and down moves towards the most recent stack frame).

def print_stack_trace(self):
        try:
            for frame_lineno in self.stack:
                self.print_stack_entry(frame_lineno)
        except KeyboardInterrupt:
            pass

def print_stack_entry(self, frame_lineno, prompt_prefix=line_prefix):
        frame, lineno = frame_lineno
        if frame is self.curframe:
            prefix = '> '
        else:
            prefix = '  '
        self.message(prefix +
                     self.format_stack_entry(frame_lineno, prompt_prefix))

# Provide help

def do_help(self, arg):
        """h(elp)
        Without argument, print the list of available commands.
        With a command name as argument, print help about that command.
        "help pdb" shows the full pdb documentation.
        "help exec" gives help on the ! command.
        """
        if not arg:
            return cmd.Cmd.do_help(self, arg)
        try:
            try:
                topic = getattr(self, 'help_' + arg)
                return topic()
            except AttributeError:
                command = getattr(self, 'do_' + arg)
        except AttributeError:
            self.error('No help for %r' % arg)
        else:
            if sys.flags.optimize >= 2:
                self.error('No help for %r; please do not run Python with -OO '
                           'if you need command help' % arg)
                return
            self.message(command.__doc__.rstrip())

do_h = do_help

def help_exec(self):
        """(!) statement
        Execute the (one-line) statement in the context of the current
        stack frame.  The exclamation point can be omitted unless the
        first word of the statement resembles a debugger command.  To
        assign to a global variable you must always prefix the command
        with a 'global' command, e.g.:
        (Pdb) global list_options; list_options = ['-l']
        (Pdb)
        """
        self.message((self.help_exec.__doc__ or '').strip())

def help_pdb(self):
        help()

# other helper functions

def lookupmodule(self, filename):
        """Helper function for break/clear parsing -- may be overridden.

lookupmodule() translates (possibly incomplete) file or module name
        into an absolute file name.
        """
        if os.path.isabs(filename) and  os.path.exists(filename):
            return filename
        f = os.path.join(sys.path[0], filename)
        if  os.path.exists(f) and self.canonic(f) == self.mainpyfile:
            return f
        root, ext = os.path.splitext(filename)
        if ext == '':
            filename = filename + '.py'
        if os.path.isabs(filename):
            return filename
        for dirname in sys.path:
            while os.path.islink(dirname):
                dirname = os.readlink(dirname)
            fullname = os.path.join(dirname, filename)
            if os.path.exists(fullname):
                return fullname
        return None

def _runmodule(self, module_name):
        self._wait_for_mainpyfile = True
        self._user_requested_quit = False
        import runpy
        mod_name, mod_spec, code = runpy._get_module_details(module_name)
        self.mainpyfile = self.canonic(code.co_filename)
        import __main__
        __main__.__dict__.clear()
        __main__.__dict__.update({
            "__name__": "__main__",
            "__file__": self.mainpyfile,
            "__package__": mod_spec.parent,
            "__loader__": mod_spec.loader,
            "__spec__": mod_spec,
            "__builtins__": __builtins__,
        })
        self.run(code)

def _runscript(self, filename):
        # The script has to run in __main__ namespace (or imports from
        # __main__ will break).
        #
        # So we clear up the __main__ and set several special variables
        # (this gets rid of pdb's globals and cleans old variables on restarts).
        import __main__
        __main__.__dict__.clear()
        __main__.__dict__.update({"__name__"    : "__main__",
                                  "__file__"    : filename,
                                  "__builtins__": __builtins__,
                                 })

# When bdb sets tracing, a number of call and line events happens
        # BEFORE debugger even reaches user's code (and the exact sequence of
        # events depends on python version). So we take special measures to
        # avoid stopping before we reach the main script (see user_line and
        # user_call for details).
        self._wait_for_mainpyfile = True
        self.mainpyfile = self.canonic(filename)
        self._user_requested_quit = False
        with io.open_code(filename) as fp:
            statement = "exec(compile(%r, %r, 'exec'))" % \
                        (fp.read(), self.mainpyfile)
        self.run(statement)

# Collect all command help into docstring, if not run with -OO

if __doc__ is not None:
    # unfortunately we can't guess this order from the class definition
    _help_order = [
        'help', 'where', 'down', 'up', 'break', 'tbreak', 'clear', 'disable',
        'enable', 'ignore', 'condition', 'commands', 'step', 'next', 'until',
        'jump', 'return', 'retval', 'run', 'continue', 'list', 'longlist',
        'args', 'p', 'pp', 'whatis', 'source', 'display', 'undisplay',
        'interact', 'alias', 'unalias', 'debug', 'quit',
    ]

for _command in _help_order:
        __doc__ += getattr(Pdb, 'do_' + _command).__doc__.strip() + '\n\n'
    __doc__ += Pdb.help_exec.__doc__

del _help_order, _command

# Simplified interface

def run(statement, globals=None, locals=None):
    Pdb().run(statement, globals, locals)

def runeval(expression, globals=None, locals=None):
    return Pdb().runeval(expression, globals, locals)

def runctx(statement, globals, locals):
    # B/W compatibility
    run(statement, globals, locals)

def runcall(*args, **kwds):
    return Pdb().runcall(*args, **kwds)

def set_trace(*, header=None):
    pdb = Pdb()
    if header is not None:
        pdb.message(header)
    pdb.set_trace(sys._getframe().f_back)

# Post-Mortem interface

def post_mortem(t=None):
    # handling the default
    if t is None:
        # sys.exc_info() returns (type, value, traceback) if an exception is
        # being handled, otherwise it returns None
        t = sys.exc_info()[2]
    if t is None:
        raise ValueError("A valid traceback must be passed if no "
                         "exception is being handled")

p = Pdb()
    p.reset()
    p.interaction(None, t)

def pm():
    post_mortem(sys.last_traceback)

# Main program for testing

TESTCMD = 'import x; x.main()'

def test():
    run(TESTCMD)

# print help
def help():
    import pydoc
    pydoc.pager(__doc__)

_usage = """\
usage: pdb.py [-c command] ... [-m module | pyfile] [arg] ...

Debug the Python program given by pyfile. Alternatively,
an executable module or package to debug can be specified using
the -m switch.

Initial commands are read from .pdbrc files in your home directory
and in the current directory, if they exist.  Commands supplied with
-c are executed after commands from .pdbrc files.

To let the script run until an exception occurs, use "-c continue".
To let the script run up to a given line X in the debugged file, use
"-c 'until X'"."""

def main():
    import getopt

opts, args = getopt.getopt(sys.argv[1:], 'mhc:', ['help', 'command='])

if not args:
        print(_usage)
        sys.exit(2)

commands = []
    run_as_module = False
    for opt, optarg in opts:
        if opt in ['-h', '--help']:
            print(_usage)
            sys.exit()
        elif opt in ['-c', '--command']:
            commands.append(optarg)
        elif opt in ['-m']:
            run_as_module = True

mainpyfile = args[0]     # Get script filename
    if not run_as_module and not os.path.exists(mainpyfile):
        print('Error:', mainpyfile, 'does not exist')
        sys.exit(1)

sys.argv[:] = args      # Hide "pdb.py" and pdb options from argument list

if not run_as_module:
        mainpyfile = os.path.realpath(mainpyfile)
        # Replace pdb's dir with script's dir in front of module search path.
        sys.path[0] = os.path.dirname(mainpyfile)

# Note on saving/restoring sys.argv: it's a good idea when sys.argv was
    # modified by the script being debugged. It's a bad idea when it was
    # changed by the user from the command line. There is a "restart" command
    # which allows explicit specification of command line arguments.
    pdb = Pdb()
    pdb.rcLines.extend(commands)
    while True:
        try:
            if run_as_module:
                pdb._runmodule(mainpyfile)
            else:
                pdb._runscript(mainpyfile)
            if pdb._user_requested_quit:
                break
            print("The program finished and will be restarted")
        except Restart:
            print("Restarting", mainpyfile, "with arguments:")
            print("\t" + " ".join(args))
        except SystemExit:
            # In most cases SystemExit does not warrant a post-mortem session.
            print("The program exited via sys.exit(). Exit status:", end=' ')
            print(sys.exc_info()[1])
        except SyntaxError:
            traceback.print_exc()
            sys.exit(1)
        except:
            traceback.print_exc()
            print("Uncaught exception. Entering post mortem debugging")
            print("Running 'cont' or 'step' will restart the program")
            t = sys.exc_info()[2]
            pdb.interaction(None, t)
            print("Post mortem debugger finished. The " + mainpyfile +
                  " will be restarted")

# When invoked as main program, invoke the debugger on a script
if __name__ == '__main__':
    import pdb
    pdb.main()

MundoGames – Otro sitio realizado con WordPress

¿ESTÁS LISTO PARA LOS MEJORES TORNEOS ESPORTS?

Compite y gana grandes premios en dinero.
Además, canjea tus GameCoins por espectaculares recompensas.

Participar

Quiero ser Premium

Próximos torneos y nuevas ediciones de La Liga eSports

Entérate de los nuevos torneos que tenemos para ti y prepárate para ser el campeón.

Martes 28/02/2023 | Torneo Mensual

Inscribirme

24/07/2023 | Torneo Mensual

Inscribirme

01/10/2023 | Torneo Semanal

Inscribirme

09/10/2023 | Torneo Semanal

Inscribirme

09/10/2023 | Torneo Semanal

Inscribirme

09/10/2023 | Torneo Semanal

Inscribirme

09/10/2023 | Torneo Semanal

Inscribirme

09/10/2023 | Torneo Semanal

Inscribirme

09/10/2023 | Torneo Semanal

Inscribirme

09/10/2023 | Torneo Semanal

Inscribirme

09/01/1991 | Torneo Mensual

Inscribirme

21/09/2024 | Torneo Mensual

Inscribirme

Diviértete con los mejores juegos online

¿Cansado de los mismos juegos de siempre? Ingresa a nuestra amplia colección de juegos y disfruta al instante de cientos de títulos llenos de acción, estrategia y destreza.

Ver todos los juegos

Conviértete en un gamer Premium y obtén valiosos beneficios

Suscríbete a MundoGames para desbloquear importantes ventajas a tu juego. Puedes registrarte gratis o también puedes obtener un pase Premium, que multiplica tus posibilidades de alcanzar la gloria.

¡Saber más sobre el pase Premium!

${this.title}

Code Editor : pdb3